Home and consumer
- Key feature
- 360 sqm pool
- Runtime
- 10 h
- Weight
- 13.2 kg
On order
From €2,290 ex VAT
Updated
USE CASE · HOSPITALITY
Hotel pool cleaning robot: a clean pool before guests arrive
The robot cleans the pool overnight or early in the morning, with no cable. Staff keep water treatment, testing and care of the pool deck.
IN BRIEF
Updated
A pool cleaning robot vacuums the floor, walls, waterline and, depending on the model, the surface, on battery and without a cable, following a path worked out by its sensors.
The Beatbot AquaSense 2 Ultra cleans pools of up to 360 m² of floor and 0.4 to 3 m deep, with up to 10 hours of runtime on the surface, according to its manufacturer.
Robot Distribution delivers it, commissions it, trains your maintenance teams and services it, to buy, rent or as RaaS.
WHY
Robotic cleaning of hotel pools
In a hotel, holiday residence or rental villa, the pool must be spotless every morning of the season. Manual vacuuming takes up maintenance staff time, often early, before the pool opens.
The robot does this cleaning on its own while the pool is closed. Water treatment and quality testing remain the establishment's responsibility; staff also keep the deck, skimmers and filtration.
HOW IT RUNS
How cleaning runs with the robot.
Into the water
In the evening or at dawn, the technician puts the robot in the water and picks the mode: floor, walls, waterline or surface. The Mammotion SPINO S1 Pro cleans floor, walls and waterline with 23 sensors, according to its manufacturer.
Autonomous cleaning
The robot covers the pool and picks up leaves, sand and fine particles: the Aiper Scuba X1 Pro Max filters down to 3 µm and also cleans slopes and underwater platforms, according to its manufacturer.
Waterline and surface
The robot scrubs the waterline, where sun cream and dirt build up, then skims the surface on models that offer it. The Dreame Z1 Pro cleans the waterline horizontally, according to its manufacturer.
Removal and care
Before opening, the technician lifts the robot out, empties and rinses the filter baskets and puts it on charge: 4.5 hours for the Beatbot AquaSense 2 Ultra, 4 hours for the Aiper Scuba X1 Pro Max, according to their manufacturers.
THE ROBOTS
Pool robots in our catalogue.
Aiper
Home and consumer
- Key feature
- 300 sqm pool
- Runtime
- 10 h
- Key feature
- 3 µm filtration
On orderFrom €1,290 ex VAT
Home and consumer
- Key feature
- 300 sqm pools
- Key feature
- 6,800 GPH
- Key feature
- 23 sensors
On orderPrice on request
Home and consumer
- Key feature
- 200 sqm pool
- Runtime
- 3 h
- Key feature
- IPX8
On orderFrom €1,090 ex VAT
BEFORE INSTALLING
What the site survey checks before commissioning.
Pool size and depth
Area, length and depth set the model and number of robots: the Dreame Z1 Pro covers up to 200 m² at 0.5 to 2.5 m depth, the Aiper Scuba X1 Pro Max up to 300 m², according to their manufacturers.
Finish and shape
Concrete, tile, liner or fibreglass, steps, underwater ledges and corners are noted to check grip and the areas to finish by hand.
Opening hours
Cycles are timed to the pool's closing hours, allowing for charging time between cycles.
Storage and charging
A sheltered place for the dock or charger near the pool and the handling of the robot are planned: the Beatbot AquaSense 2 Ultra weighs 13.2 kg, according to its manufacturer.
FAQ
Hoteliers' questions about pool robots.
How large a pool can a robot clean?
According to the manufacturers: up to 360 m² of floor for the Beatbot AquaSense 2 Ultra, 300 m² for the Aiper Scuba X1 Pro Max and Mammotion SPINO S1 Pro, 200 m² for the Dreame Z1 Pro. For a larger pool, we plan several robots or several cycles.
Does the robot replace water treatment?
No. It vacuums and filters debris; the Beatbot AquaSense 2 Ultra adds a water clarification function, according to its manufacturer. Water treatment, disinfection and testing remain the establishment's job.
How long does a cycle last?
According to the manufacturers: up to 5 hours on the floor and 10 hours on the surface for the Beatbot AquaSense 2 Ultra, up to 10 hours skimming for the Aiper Scuba X1 Pro Max, over 180 minutes for the Dreame Z1 Pro.
Does it need a cable or a fixed installation?
No. These robots run on battery with no cable; the Aiper Scuba X1 Pro Max charges wirelessly and the Dreame Z1 Pro through a magnetic connector, according to their manufacturers.
How fine is the filtration?
According to the manufacturers: two baskets of 150 and 250 µm for the Beatbot AquaSense 2 Ultra, 180 and 3 µm filters for the Aiper Scuba X1 Pro Max, a 180 µm filter for the Dreame Z1 Pro.
USE CASES
Room deliveryA guest asks for towels, a toothbrush or a room service tray: the robot takes the order to the room door, lift included. The receptionist never leaves the desk.
Night cleaning of offices and hotelsThe robot takes the large, repetitive areas, corridor carpets, the lobby, office floors, while the cleaning team handles what needs a hand: washrooms, guest rooms, finishing.
Robotic cleaning of hotel windows and facadesThe drone washes the facade from the ground, the robot drives over the atrium glass roof or travels the tower on its cables, in short slots agreed with the hotel. Teams keep the barriers, guest information and finishing.
Hotel and resort grounds robotsThe robot mows the hotel lawns at hours when guests are not in the garden, and can clear the paths in winter. Gardeners keep the planting, pruning and presentation of the grounds.
Send us your pool dimensions. We choose the right robot.
Robots, acquisition mode and delivery terms, in one written proposal.