FANUC
Collaborative robots
- Payload
- 10 kg
- Reach
- 1,249 mm
- Axes
- 6
On order
From €36,990 ex VATor €1,259/month in RaaS
Photo to come · Three-quarter front view
01 / 05Schematic drawing until photos are supplied
YASKAWARD-YAS-MOTOMANHC10DTP
Yaskawa Motoman HC10DTP
A collaborative robot by Yaskawa with payload 10 kg, reach 1,200 mm and axes 6.
On orderCollaborative robot
PURCHASEOutright purchase
You own the robot. Warranty, training and a service contract can be added.
Number of robots
From €38,090
Indicative price ex VAT for one robot in its base version. The exact price (options, delivery, commissioning) is in the written quote.
- No commitment. A request is not an order.
- EU declaration of conformity supplied with every robot.
IN BRIEF
The Yaskawa Motoman HC10DTP in brief.
Updated · Source: manufacturer's published specifications
The Yaskawa Motoman HC10DTP is a collaborative robot by Yaskawa. Key figures published by the manufacturer: payload 10 kg, reach 1,200 mm and axes 6. It also lists ingress protection: IP67. Robot Distribution supplies it in Europe to buy, rent or as RaaS, with its EU declaration of conformity, from €38,090 ex VAT.
- Payload
- 10kg
- Reach
- 1,200mm
- Axes
- 6
OVERVIEW
The Yaskawa Motoman HC10DTP in detail
The Motoman HC10DTP is Yaskawa’s six-axis collaborative robot for 10 kg loads, taught by hand guiding or with the Smart Pendant. According to the manufacturer, it offers a 1200 mm effective reach (2400 mm vertically), ±0.05 mm repeatability and IP67 protection, and it is lubricated with NSF H1 food-grade grease. It moves its tool at 1000 mm/s in collaborative operation and up to 2000 mm/s when the cell runs in non-collaborative mode.
It suits machine tending, assembly, packaging and food handling, where the IP67 body and food-grade grease make cleaning and wet environments easier to manage. Air, Ethernet and I/O run through the arm, which keeps cables away from the tool. Check the 0 to 40 °C operating range, the 1.0 kVA supply, the mounting (floor, ceiling, wall or tilted) and whether the YRC1000micro or the full YRC1000 controller suits your line.
Robot Distribution can source the HC10DTP on request and coordinate the cell with an integrator familiar with Motoman programming.
Key points
- 10 kg payload, 1200 mm effective reach
- IP67 with NSF H1 food-grade grease
- Hand-guided teaching
- Air, Ethernet and I/O through the arm
SPECIFICATIONS
Full specifications
Updated · Source: manufacturer's published specifications
| Payload | 10 kg |
|---|---|
| Max TCP speed (collaborative) | 1000 mm/s |
| Max TCP speed (non-collaborative) | 2000 mm/s |
| Power supply | 1 kVA |
|---|
| Reach | 1,200 mm |
|---|---|
| Axes | 6 |
| Repeatability | ±0.05 mm |
| Vertical reach | 2400 mm |
| Max joint speed (S, L) | 130 °/s |
| Max joint speed (B, T) | 250 °/s |
| Controller | YRC1000 or YRC1000micro |
|---|
| Operating temperature | 0 to 40 °C |
|---|---|
| Ingress protection | IP67 |
| Mounting | Floor, ceiling, wall or tilted |
|---|
A value the manufacturer does not publish is left out of this page rather than estimated. Conditions stated by the manufacturer are kept with the value.
SOURCES AND LAST CHECK
Where these figures come from.
Every figure on this page comes from the manufacturer's official pages, read and checked by our team.
Figures taken from the manufacturer's published specifications. · Last checked
DOCUMENTS
Documents
Sent with your written quote, in English and in your language where the manufacturer publishes it.
| Document | Availability |
|---|---|
| Datasheet (PDF) | On request |
| EU declaration of conformity | On request |
| User manual | On request |
FAQ
Questions about the Yaskawa Motoman HC10DTP
How much does the Yaskawa Motoman HC10DTP cost?
The Yaskawa Motoman HC10DTP starts at €38,090 ex VAT for one robot in its base version, or from €1,299/month ex VAT in RaaS over 36 months. The exact price depends on the version and its options, the number of robots, delivery and commissioning on your site and training: it is set out in a written quote sent within 2 working days.
Is the Yaskawa Motoman HC10DTP supplied with an EU declaration of conformity?
Yes. Robot Distribution supplies the EU declaration of conformity with every robot it delivers in Europe. Ask for a copy with your quote and our team sends it with the other documents.
How are delivery and commissioning organised?
The delivery address, the date and the commissioning on site are set out in the written quote, according to your site and the number of robots. Our team can install the robot, map the site and train your staff.
Can I rent the Yaskawa Motoman HC10DTP or take it as RaaS?
Yes. Rental runs from 1 day to 12 months; RaaS runs from 24 to 60 months with one monthly fee that covers the robot, maintenance, software updates and a replacement robot if one fails. Both are priced in a written quote.
What after-sales service is available?
After-sales service is run from Europe: a service contract, spare parts, repairs and training can be added to a purchase, and maintenance is included in RaaS. The terms are set out in the written quote.
SIMILAR ROBOTS
Compare before you decide.
KUKA
Collaborative robots
- Payload
- 11 kg
- Reach
- 1,300 mm
- Axes
- 6
On orderPrice on request
Tell us about your site. We will size the fleet.
A written proposal: robots, acquisition mode and delivery.