Photo to come · Three-quarter front view
01 / 05Schematic drawing until photos are supplied
FANUCRD-FAN-CRX20IAL
FANUC CRX-20iA/L
A collaborative robot by FANUC with payload 20 kg, reach 1,418 mm and axes 6.
On orderCollaborative robot
PURCHASEOutright purchase
You own the robot. Warranty, training and a service contract can be added.
Number of robots
From €44,990
Indicative price ex VAT for one robot in its base version. The exact price (options, delivery, commissioning) is in the written quote.
- No commitment. A request is not an order.
- EU declaration of conformity supplied with every robot.
IN BRIEF
The FANUC CRX-20iA/L in brief.
Updated · Source: manufacturer's published specifications
The FANUC CRX-20iA/L is a collaborative robot by FANUC. Key figures published by the manufacturer: payload 20 kg, reach 1,418 mm and axes 6. It also lists ingress protection: IP67. Robot Distribution supplies it in Europe to buy, rent or as RaaS, with its EU declaration of conformity, from €44,990 ex VAT.
- Payload
- 20kg
- Reach
- 1,418mm
- Axes
- 6
OVERVIEW
The FANUC CRX-20iA/L in detail
The CRX-20iA/L is the long-reach, 20 kg member of FANUC’s CRX collaborative family. According to the manufacturer, it carries 20 kg over 1418 mm, repeats to ±0.04 mm and weighs 41 kg, a light arm for its payload class. Body and wrist are protected to IP67, and average power consumption is 0.4 kW on the R-30iB Plus controller.
Palletizing is its typical job, along with machine tending, heavy part handling and welding with heavier torches. Check that the top pallet layer stays within the 1418 mm envelope, or plan a lift column. FANUC’s published data for this model do not clearly state the maximum tool speed, so validate cycle time with a simulation or a trial before committing. Mounting can be floor, ceiling or angled, and the operating range is 0 to 45 °C.
Robot Distribution can source the CRX-20iA/L on request and build the palletizing or tending cell with a partner integrator.
Key points
- 20 kg payload
- 1418 mm reach
- IP67 body and wrist
- Floor, ceiling or angled mounting
SPECIFICATIONS
Full specifications
Updated · Source: manufacturer's published specifications
| Payload | 20 kg |
|---|
| Weight | 41 kg |
|---|
| Average power | 0.4 kW |
|---|
| Reach | 1,418 mm |
|---|---|
| Axes | 6 |
| Repeatability | ±0.04 mm |
| Controller | R-30iB Plus |
|---|
| Operating temperature | 0 to 45 °C |
|---|---|
| Ingress protection | IP67 |
| Mounting | Floor, ceiling or angled |
|---|
A value the manufacturer does not publish is left out of this page rather than estimated. Conditions stated by the manufacturer are kept with the value.
SOURCES AND LAST CHECK
Where these figures come from.
Every figure on this page comes from the manufacturer's official pages, read and checked by our team.
Figures taken from the manufacturer's published specifications. · Last checked
DOCUMENTS
Documents
Sent with your written quote, in English and in your language where the manufacturer publishes it.
| Document | Availability |
|---|---|
| Datasheet (PDF) | On request |
| EU declaration of conformity | On request |
| User manual | On request |
FAQ
Questions about the FANUC CRX-20iA/L
How much does the FANUC CRX-20iA/L cost?
The FANUC CRX-20iA/L starts at €44,990 ex VAT for one robot in its base version, or from €1,529/month ex VAT in RaaS over 36 months. The exact price depends on the version and its options, the number of robots, delivery and commissioning on your site and training: it is set out in a written quote sent within 2 working days.
Is the FANUC CRX-20iA/L supplied with an EU declaration of conformity?
Yes. Robot Distribution supplies the EU declaration of conformity with every robot it delivers in Europe. Ask for a copy with your quote and our team sends it with the other documents.
How are delivery and commissioning organised?
The delivery address, the date and the commissioning on site are set out in the written quote, according to your site and the number of robots. Our team can install the robot, map the site and train your staff.
Can I rent the FANUC CRX-20iA/L or take it as RaaS?
Yes. Rental runs from 1 day to 12 months; RaaS runs from 24 to 60 months with one monthly fee that covers the robot, maintenance, software updates and a replacement robot if one fails. Both are priced in a written quote.
What after-sales service is available?
After-sales service is run from Europe: a service contract, spare parts, repairs and training can be added to a purchase, and maintenance is included in RaaS. The terms are set out in the written quote.
SIMILAR ROBOTS
Compare before you decide.
Yaskawa
Collaborative robots
- Payload
- 20 kg
- Reach
- 1,700 mm
- Axes
- 6
On orderFrom €52,190 ex VATor €1,769/month in RaaS
Tell us about your site. We will size the fleet.
A written proposal: robots, acquisition mode and delivery.