Skip to content
ROBOT DISTRIBUTION
DF062, photo 1 of 301 / 03
RD-DFA-DF062

DF062

A construction robot by Dafang AI with paint up to 6.2 m high, weight 300 kg and paint up to 150 sqm/h.

On orderConstruction robot
PURCHASEOutright purchase

You own the robot. Warranty, training and a service contract can be added.

Number of robots
1

Price on request

Purchase price, ex VAT, in the written quote.

  • No commitment. A request is not an order.
  • EU declaration of conformity supplied with every robot.

IN BRIEF

The DF062 in brief.

Updated · Source: manufacturer's published specifications

The Dafang AI DF062 Wall Finishing Robot is a construction robot by Dafang AI. Key figures published by the manufacturer: paint up to 6.2 m high, weight 300 kg and paint up to 150 sqm/h. Robot Distribution supplies it in Europe to buy, rent or as RaaS, with its EU declaration of conformity. Price on request.

Weight
300kg

OVERVIEW

The DF062 in detail

The Dafang AI DF062 is the high-wall version of the Dafang wall finishing robot. A telescopic lift carries the working head to 6.2 m for latex paint and to 5.25 m for putty skimming and sanding, which covers lobbies, corridors, shopping centres and public buildings without scaffolding. The same base takes four modules: concrete wall grinding (C15 to C70, up to 5 mm deep, 2.4 kW), putty skimming fed by an external cart, putty sanding with 60 to 320 grit, and airless painting at 8 to 12 MPa. The three-section design (chassis, lift, gimbal) comes apart and goes back together with one person, which makes site deliveries easier.

The manufacturer gives up to 150 m² per hour in painting, 60 m² per hour in sanding and 30 m² per hour in concrete grinding. The 300 kg robot runs on mains power or two 60 Ah lithium batteries, moves at up to 400 mm/s, crosses 25 mm thresholds and 25° ramps, and positions itself within ±10 mm. Multi-sensor perception warns the operator by voice about obstacles and the remaining paint, and the app shows battery level and cabinet conditions. Robot Distribution supplies the DF062 on request in Europe, with commissioning, training and after-sales service.

Key points

  • Paints walls up to 6.2 m high
  • Grinds C15 to C70 concrete, up to 5 mm deep
  • Four modules: grinding, skimming, sanding, painting
  • Voice alerts and app control

SPECIFICATIONS

Full specifications

Updated · Source: manufacturer's published specifications

01 Performance
Max speed≤400 mm/s
Max. pressurePainting 8–12 MPa; skimming up to 20 MPa
02 Dimensions and weight
Weight300 kg
Weight≤300 kg
Dimensions1,665 × 860 × 1,726 mm
Working heightPainting 0–6,200 mm; skimming 200–5,250 mm; sanding 300–5,250 mm
03 Battery and power
Battery2 × 60 Ah industrial lithium batteries, or direct 220 V AC
Power supply220 V plug-in (13.6 A) or battery
04 Navigation and sensing
Navigation5G and SLAM positioning: path planning and obstacle avoidance; multi-sensor voice alerts (obstacles, remaining paint)
Positioning accuracy±10 mm
Obstacle clearance≤25 mm obstacles, ≤25° slopes, gaps up to 64 mm
05 Connectivity and interface
SoftwareAndroid phone or tablet app; battery level, cabinet temperature and humidity displayed
06 Features
Key featurePaint up to 6.2 m high
Key featurePaint up to 150 sqm/h
07 Other specifications
GrindingConcrete walls C15 to C70, up to 5 mm deep, ≤2.4 kW; putty sanding ≤800 W, 60 to 320 grit
ModulesConcrete wall grinding, putty skimming, putty sanding and latex paint spraying modules
Area ratePainting ≤150 sqm/h; skimming ≤50 sqm/h; putty sanding ≤60 sqm/h; concrete grinding ≤30 sqm/h (C40, 2 mm deep)
Paint capacityExternal 20 L paint bucket, replaceable and refillable; external putty feeder
StructureThree-section modular design (chassis, lifting section, gimbal), taken apart and assembled by one person; 8-axis flexible arm for ceilings, edges and corners
AccessoriesDFM01 automatic material feeder (putty and paint, wireless sync with the robot); DFR250 platform lift cart (300 kg, lifts 85 cm) and DFSC250 stair-climbing robot (250 kg load) to move the robot between floors

A value the manufacturer does not publish is left out of this page rather than estimated. Conditions stated by the manufacturer are kept with the value.

SOURCES AND LAST CHECK

Where these figures come from.

Every figure on this page comes from the manufacturer's official pages, read and checked by our team.

Figures taken from the manufacturer's published specifications. · Last checked

DOCUMENTS

Documents

Leave your contact details to download the manufacturer’s documents below. The EU declaration of conformity and the user manual are sent with your written quote.

DocumentAvailability
Dafang AI product catalogue – full range (November 2026)PDF · 2.7 MB · English
EU declaration of conformityOn request
User manualOn request
Request the documents

FAQ

Questions about the DF062

How much does the DF062 cost?

The DF062 is sold on a written quote, sent within 2 working days. The price depends on the version and its options, the number of robots, delivery and commissioning on your site, training, and the acquisition mode: purchase, rental or RaaS with one monthly fee. Prices are not published because these items change from one project to the next.

Is the DF062 supplied with an EU declaration of conformity?

Yes. Robot Distribution supplies the EU declaration of conformity with every robot it delivers in Europe. Ask for a copy with your quote and our team sends it with the other documents.

How are delivery and commissioning organised?

The delivery address, the date and the commissioning on site are set out in the written quote, according to your site and the number of robots. Our team can install the robot, map the site and train your staff.

Can I rent the DF062 or take it as RaaS?

Yes. Rental runs from 1 day to 12 months; RaaS runs from 24 to 60 months with one monthly fee that covers the robot, maintenance, software updates and a replacement robot if one fails. Both are priced in a written quote.

What after-sales service is available?

After-sales service is run from Europe: a service contract, spare parts, repairs and training can be added to a purchase, and maintenance is included in RaaS. The terms are set out in the written quote.

SIMILAR ROBOTS

Compare before you decide.

All robots in Construction robots
  • 2.5 m Concrete Screed Robot

    Construction robots

    Key feature
    350–600 sqm/h
    Weight
    300 kg
    Key feature
    2.5 m screed head
    On order
    Price on request
  • Concrete Finishing Robot 80SZ

    Construction robots

    Key feature
    300–400 sqm/h
    Weight
    340 kg
    Key feature
    800 mm trowel
    On order
    Price on request
  • Concrete Leveling Robot 25

    Construction robots

    Key feature
    ≥300 sqm/h
    Weight
    350 kg
    Key feature
    2.5 m screed head
    On order
    Price on request

Tell us about your site. We will size the fleet.

A written proposal: robots, acquisition mode and delivery.