Skip to content
ROBOT DISTRIBUTION
Concrete Finishing Robot 80SZ, photo 1 of 301 / 03
RD-BRD-CFR80SZ

Concrete Finishing Robot 80SZ

A construction robot by Bright Dream Robotics with 300–400 sqm/h, weight 340 kg and 800 mm trowel.

On orderConstruction robot
PURCHASEOutright purchase

You own the robot. Warranty, training and a service contract can be added.

Number of robots
1

Price on request

Purchase price, ex VAT, in the written quote.

  • No commitment. A request is not an order.
  • EU declaration of conformity supplied with every robot.

IN BRIEF

The Concrete Finishing Robot 80SZ in brief.

Updated · Source: manufacturer's published specifications

The Bright Dream Concrete Finishing Robot 80SZ is a construction robot by Bright Dream Robotics. Key figures published by the manufacturer: 300–400 sqm/h, weight 340 kg and 800 mm trowel. It also lists operating temperature: 0 to 45 °C. Robot Distribution supplies it in Europe to buy, rent or as RaaS, with its EU declaration of conformity. Price on request.

Weight
340kg

OVERVIEW

The Concrete Finishing Robot 80SZ in detail

The Bright Dream Concrete Finishing Robot 80SZ is a power-trowelling robot for large concrete floors. It compacts, lifts the slurry, closes and polishes the surface of cast-in-place concrete with an 800 mm trowel disc turning at up to 150 rpm, either fully automatically, using SLAM mapping, path planning and autonomous navigation, or under remote control by one operator. One pass covers 300 to 400 m² per hour, with a denser, more wear-resistant and more even finish than manual power floats according to the manufacturer.

The 340 kg robot measures 1,600 × 900 × 1,310 mm and runs at least four hours on a 48 V, 160 Ah battery. It replaces one traditional finisher and works with the leveling robots and the placing boom of the same concrete range. Typical sites are basements, plazas, factories, airports and shopping centres, such as Guangzhou Baiyun station. Robot Distribution supplies it on request in Europe, with commissioning and after-sales service.

Key points

  • Fully automatic or remote-controlled
  • 300–400 m²/h per pass
  • SLAM mapping and path planning
  • Saves one power-float operator

SPECIFICATIONS

Full specifications

Updated · Source: manufacturer's published specifications

01 Performance
Disc speed0–150 rpm
02 Dimensions and weight
Weight340 kg
Weight340 kg
Dimensions1,600 × 900 × 1,310 mm
03 Battery and power
Battery48 V / 160 Ah
Runtime≥4 h
Charging time≤4 h
04 Navigation and sensing
Positioning accuracyNavigation deviation ≤200 mm in automatic mode
05 Environment
Operating temperature0 to 45 °C
06 Features
Key feature300–400 sqm/h
Key feature800 mm trowel
07 Other specifications
Area rate≥300 sqm/h per pass (300–400 sqm/h)
Working width800 mm trowel disc
Operating modesFully automatic (SLAM mapping, path planning, navigation) or remote control

A value the manufacturer does not publish is left out of this page rather than estimated. Conditions stated by the manufacturer are kept with the value.

SOURCES AND LAST CHECK

Where these figures come from.

Every figure on this page comes from the manufacturer's official pages, read and checked by our team.

Figures taken from the manufacturer's published specifications. · Last checked

DOCUMENTS

Documents

Sent with your written quote, in English and in your language where the manufacturer publishes it.

DocumentAvailability
Datasheet (PDF)On request
EU declaration of conformityOn request
User manualOn request
Request the documents

FAQ

Questions about the Concrete Finishing Robot 80SZ

How much does the Concrete Finishing Robot 80SZ cost?

The Concrete Finishing Robot 80SZ is sold on a written quote, sent within 2 working days. The price depends on the version and its options, the number of robots, delivery and commissioning on your site, training, and the acquisition mode: purchase, rental or RaaS with one monthly fee. Prices are not published because these items change from one project to the next.

Is the Concrete Finishing Robot 80SZ supplied with an EU declaration of conformity?

Yes. Robot Distribution supplies the EU declaration of conformity with every robot it delivers in Europe. Ask for a copy with your quote and our team sends it with the other documents.

How are delivery and commissioning organised?

The delivery address, the date and the commissioning on site are set out in the written quote, according to your site and the number of robots. Our team can install the robot, map the site and train your staff.

Can I rent the Concrete Finishing Robot 80SZ or take it as RaaS?

Yes. Rental runs from 1 day to 12 months; RaaS runs from 24 to 60 months with one monthly fee that covers the robot, maintenance, software updates and a replacement robot if one fails. Both are priced in a written quote.

What after-sales service is available?

After-sales service is run from Europe: a service contract, spare parts, repairs and training can be added to a purchase, and maintenance is included in RaaS. The terms are set out in the written quote.

SIMILAR ROBOTS

Compare before you decide.

All robots in Construction robots
  • Concrete Leveling Robot 25

    Construction robots

    Key feature
    ≥300 sqm/h
    Weight
    350 kg
    Key feature
    2.5 m screed head
    On order
    Price on request
  • Indoor Coating Robot NP320

    Construction robots

    Key feature
    180 sqm/h
    Weight
    350 kg
    Key feature
    3.2 m spray height
    On order
    Price on request
  • DF062 Plastering

    Construction robots

    Key feature
    Plaster up to 60 sqm/h
    Weight
    350 kg
    Key feature
    880 mm per pass
    On order
    Price on request

Tell us about your site. We will size the fleet.

A written proposal: robots, acquisition mode and delivery.