Skip to content
ROBOT DISTRIBUTION
S-940, photo 1 of 301 / 03
RD-SOM-S940

S-940

A construction robot by Somero with self-levelling screed head, weight 805 kg and head up to 3 m.

On orderConstruction robot
PURCHASEOutright purchase

You own the robot. Warranty, training and a service contract can be added.

Number of robots
1

Price on request

Purchase price, ex VAT, in the written quote.

  • No commitment. A request is not an order.
  • EU declaration of conformity supplied with every robot.

IN BRIEF

The S-940 in brief.

Updated · Source: manufacturer's published specifications

The Somero S-940 Laser Screed is a construction robot by Somero. Key figures published by the manufacturer: self-levelling screed head, weight 805 kg and head up to 3 m. Robot Distribution supplies it in Europe to buy, rent or as RaaS, with its EU declaration of conformity. Price on request.

Weight
805kg

OVERVIEW

The S-940 in detail

The Somero S-940 is a versatile ride-on Laser Screed machine with a fully automated self-levelling screed head, fewer switches and an easy-access hinged console. Its elevation beam folds to give a 1.5 m transport width and easy entry to sites, and the offset screed head reduces overlap between passes. An auger screed head works over chaired mesh, chaired rebar, heat tubes and some slab-on-deck, while a raking and fine-grade head spreads concrete, sand or stone.

The 805 kg machine has four-wheel hydraulic drive and a Honda GX690 petrol engine of 16 kW, or an optional 18 kW Kubota diesel; a low-pressure option brings ground pressure down to 57 kPa. It works with slumps as low as 8.9 cm, uses Somero's OASIS laser control, Quick GradeSet and Column-Block protection, and is compatible with the 3-D Profiler System. Robot Distribution supplies Somero machines on request, with a check of the European configuration and the delivery and commissioning arrangements with the manufacturer's European service centre.

Key points

  • Fully automated self-levelling screed head
  • Foldable beam, 1.5 m wide for transport
  • Petrol or optional diesel engine
  • Raking and fine-grade head

SPECIFICATIONS

Full specifications

Updated · Source: manufacturer's published specifications

01 Performance
Ground pressure141.7 kPa as standard, 57.2 kPa with the optional low-pressure configuration
02 Dimensions and weight
Weight805 kg
Weight805 kg
DimensionsWidth 1.5 m and height 1.5 m in transport mode, length 3.4 m with screed head
03 Battery and power
PowerHonda GX690 petrol engine 22 hp (16 kW) as standard; Kubota DH902 diesel 24.8 hp (18 kW) as an option
04 Connectivity and interface
ControlOASIS laser control system, Somero Quick GradeSet System for fast one-person set-up, Column-Block protection
05 Environment
MaterialsConcrete with a slump as low as 3.5 in (8.9 cm)
06 Features
Key featureSelf-levelling screed head
Key featureHead up to 3 m
07 Other specifications
DriveSelf-propelled, four-wheel drive with hydraulic motors; foldable elevation beam; offset screed head
CompatibilityCompatible with the Somero 3-D Profiler System; auto valve calibration
ToolsAuger screed head for chaired mesh, chaired rebar, heat tubes and some slab-on-deck; raking/fine grade head for concrete, sand or stone; optional rotating head dollies
Working widthScreed head 8 ft (2.4 m) as standard, 10 ft (3 m) as an option; raking/fine grade head 9 ft (2.7 m)

A value the manufacturer does not publish is left out of this page rather than estimated. Conditions stated by the manufacturer are kept with the value.

SOURCES AND LAST CHECK

Where these figures come from.

Every figure on this page comes from the manufacturer's official pages, read and checked by our team.

Figures taken from the manufacturer's published specifications. · Last checked

DOCUMENTS

Documents

Sent with your written quote, in English and in your language where the manufacturer publishes it.

DocumentAvailability
Datasheet (PDF)On request
EU declaration of conformityOn request
User manualOn request
Request the documents

FAQ

Questions about the S-940

How much does the S-940 cost?

The S-940 is sold on a written quote, sent within 2 working days. The price depends on the version and its options, the number of robots, delivery and commissioning on your site, training, and the acquisition mode: purchase, rental or RaaS with one monthly fee. Prices are not published because these items change from one project to the next.

Is the S-940 supplied with an EU declaration of conformity?

Yes. Robot Distribution supplies the EU declaration of conformity with every robot it delivers in Europe. Ask for a copy with your quote and our team sends it with the other documents.

How are delivery and commissioning organised?

The delivery address, the date and the commissioning on site are set out in the written quote, according to your site and the number of robots. Our team can install the robot, map the site and train your staff.

Can I rent the S-940 or take it as RaaS?

Yes. Rental runs from 1 day to 12 months; RaaS runs from 24 to 60 months with one monthly fee that covers the robot, maintenance, software updates and a replacement robot if one fails. Both are priced in a written quote.

What after-sales service is available?

After-sales service is run from Europe: a service contract, spare parts, repairs and training can be added to a purchase, and maintenance is included in RaaS. The terms are set out in the written quote.

SIMILAR ROBOTS

Compare before you decide.

All robots in Construction robots
  • DPD460E

    DPD460E

    Construction robots

    Key feature
    Up to 6 m high
    Weight
    855 kg
    Key feature
    Paint 200–300 sqm/h
    On order
    Price on request
  • Floor Grinding Robot 850M

    Construction robots

    Key feature
    850 mm grinding width
    Weight
    754 kg
    Key feature
    Built-in 2.4 kW vacuum
    On order
    Price on request
  • DFG800

    DFG800

    Construction robots

    Key feature
    Up to 230 sqm/h
    Weight
    750 kg
    Key feature
    18 kW grinding
    On order
    Price on request

Tell us about your site. We will size the fleet.

A written proposal: robots, acquisition mode and delivery.