RD-EFT-GR61502200
EFORT GR6150-2200
An industrial robot by EFORT with payload 15 kg, reach 2,203 mm and axes 6.
On orderIndustrial robot
PURCHASEOutright purchase
You own the robot. Warranty, training and a service contract can be added.
Number of robots
Price on request
Purchase price, ex VAT, in the written quote.
- No commitment. A request is not an order.
- EU declaration of conformity supplied with every robot.
IN BRIEF
The EFORT GR6150-2200 in brief.
Updated · Source: manufacturer's published specifications
The EFORT GR6150-2200 is an industrial robot by EFORT. Key figures published by the manufacturer: payload 15 kg, reach 2,203 mm and axes 6. Robot Distribution supplies it in Europe to buy, rent or as RaaS, with its EU declaration of conformity. Price on request.
- Payload
- 15kg
- Reach
- 2,203mm
- Axes
- 6
OVERVIEW
The EFORT GR6150-2200 in detail
For larger parts on a paint line, EFORT offers the GR6150-2200. According to the manufacturer, this six-axis painting robot takes a 15 kg wrist payload and reaches 2,203 mm, run by the M-type controller. The extra payload leaves room for heavier atomisers or a gun with additional equipment at the wrist.
The maker lists spray painting of furniture, sanitary ceramics, household appliances and car parts, which are bulky items with deep or curved surfaces. A buyer should check whether one robot can cover both sides of the part from the conveyor or whether two arms are needed, the floor position inside the booth, the colour-change and cleaning routine, booth ventilation and the hazardous-area classification, which must be matched to the robot's execution before ordering.
Compared with the GR6100-1700, it gives more payload and a longer reach, so it suits washbasins, cabinets, appliance panels or bumpers rather than small parts; the smaller model remains the better fit for a compact booth. Robot Distribution supplies it with programming support and can coordinate its integration into an existing paint booth.
Key points
- Painting robot with a 15 kg wrist payload
- 2,203 mm reach for bulky parts
- 6 axes, EFORT M-type controller
- Furniture, sanitary ceramics, appliances, car parts
SPECIFICATIONS
Full specifications
Updated · Source: manufacturer's published specifications
| Payload | 15 kg |
|---|
| Reach | 2,203 mm |
|---|---|
| Axes | 6 |
| Controller | M-type controller |
|---|
A value the manufacturer does not publish is left out of this page rather than estimated. Conditions stated by the manufacturer are kept with the value.
SOURCES AND LAST CHECK
Where these figures come from.
Every figure on this page comes from the manufacturer's official pages, read and checked by our team.
Figures taken from the manufacturer's published specifications. · Last checked
DOCUMENTS
Documents
Sent with your written quote, in English and in your language where the manufacturer publishes it.
| Document | Availability |
|---|---|
| Datasheet (PDF) | On request |
| EU declaration of conformity | On request |
| User manual | On request |
FAQ
Questions about the EFORT GR6150-2200
How much does the EFORT GR6150-2200 cost?
The EFORT GR6150-2200 is sold on a written quote, sent within 2 working days. The price depends on the version and its options, the number of robots, delivery and commissioning on your site, training, and the acquisition mode: purchase, rental or RaaS with one monthly fee. Prices are not published because these items change from one project to the next.
Is the EFORT GR6150-2200 supplied with an EU declaration of conformity?
Yes. Robot Distribution supplies the EU declaration of conformity with every robot it delivers in Europe. Ask for a copy with your quote and our team sends it with the other documents.
How are delivery and commissioning organised?
The delivery address, the date and the commissioning on site are set out in the written quote, according to your site and the number of robots. Our team can install the robot, map the site and train your staff.
Can I rent the EFORT GR6150-2200 or take it as RaaS?
Yes. Rental runs from 1 day to 12 months; RaaS runs from 24 to 60 months with one monthly fee that covers the robot, maintenance, software updates and a replacement robot if one fails. Both are priced in a written quote.
What after-sales service is available?
After-sales service is run from Europe: a service contract, spare parts, repairs and training can be added to a purchase, and maintenance is included in RaaS. The terms are set out in the written quote.
SIMILAR ROBOTS
Compare before you decide.
Tell us about your site. We will size the fleet.
A written proposal: robots, acquisition mode and delivery.