Skip to content
ROBOT DISTRIBUTION
DF106, photo 1 of 201 / 02
RD-DFA-DF106

DF106

A construction robot by Dafang AI with 2,000 blocks per 10 h, weight 380 kg and blocks up to 20 kg.

On orderConstruction robot
PURCHASEOutright purchase

You own the robot. Warranty, training and a service contract can be added.

Number of robots
1

Price on request

Purchase price, ex VAT, in the written quote.

  • No commitment. A request is not an order.
  • EU declaration of conformity supplied with every robot.

IN BRIEF

The DF106 in brief.

Updated · Source: manufacturer's published specifications

The Dafang AI DF106 Brick Laying Robot is a construction robot by Dafang AI. Key figures published by the manufacturer: 2,000 blocks per 10 h, weight 380 kg and blocks up to 20 kg. Robot Distribution supplies it in Europe to buy, rent or as RaaS, with its EU declaration of conformity. Price on request.

Weight
380kg

OVERVIEW

The DF106 in detail

The Dafang AI DF106 is a block laying robot for partition, infill and enclosure walls. It grabs each block, carries it and lays it on a thin bed of cement-based adhesive, using a high-precision positioning system and control algorithms that keep joints even and the wall plumb and flat. It works with autoclaved aerated concrete blocks, lightweight blocks and hollow bricks up to 20 kg, with standard, flexible (S type) or exterior-wall (P type) adhesives.

The manufacturer gives a cycle of 15 seconds or less per block, up to 2,000 blocks in 10 hours, a placement accuracy of 3 mm and walls up to 4.5 m high. The 380 kg robot runs on mains power or battery and moves within ±10 mm. It suits the long, repetitive walls of housing, offices, shopping centres and factory enclosures, where it lays without pause and takes the heavy lifting off the masons. Robot Distribution supplies the DF106 on request in Europe, with a check of the block and adhesive formats used on site, commissioning and after-sales service.

Key points

  • Grabs, carries and lays blocks on its own
  • Up to 2,000 blocks in 10 hours
  • Blocks up to 20 kg, placed within 3 mm
  • Walls up to 4.5 m high

SPECIFICATIONS

Full specifications

Updated · Source: manufacturer's published specifications

01 Performance
Max speed≤400 mm/s
02 Dimensions and weight
Weight380 kg
Weight≤380 kg
Dimensions1,679 × 870 × 1,813 mm
Working heightWalls up to 4.5 m
03 Battery and power
Battery2 × 60 Ah industrial lithium batteries, or direct 220 V AC
Power supply220 V plug-in or battery
04 Navigation and sensing
Positioning accuracy±10 mm
Obstacle clearance≤25 mm obstacles, ≤25° slopes, gaps up to 64 mm
05 Connectivity and interface
SoftwarePhone or tablet app: parameter settings and live data
06 Environment
MaterialsAutoclaved aerated concrete blocks, lightweight blocks and hollow bricks
07 Features
Key feature2,000 blocks per 10 h
Key featureBlocks up to 20 kg
08 Other specifications
ProcessThin-joint laying with cement-based adhesive, flexible cement-based adhesive (S type) or exterior-wall adhesive (P type); masonry strength M5.0 (28-day compressive strength ≥5.0 MPa), tensile bond strength ≥0.5 MPa after 14 days
AccuracyBlock placement ≤3 mm
Cycle time≤15 s per block; up to 2,000 blocks per 10 hours
Max. loadBlocks up to 20 kg

A value the manufacturer does not publish is left out of this page rather than estimated. Conditions stated by the manufacturer are kept with the value.

SOURCES AND LAST CHECK

Where these figures come from.

Every figure on this page comes from the manufacturer's official pages, read and checked by our team.

Figures taken from the manufacturer's published specifications. · Last checked

DOCUMENTS

Documents

Leave your contact details to download the manufacturer’s documents below. The EU declaration of conformity and the user manual are sent with your written quote.

DocumentAvailability
Dafang AI product catalogue – full range (November 2026)PDF · 2.7 MB · English
EU declaration of conformityOn request
User manualOn request
Request the documents

FAQ

Questions about the DF106

How much does the DF106 cost?

The DF106 is sold on a written quote, sent within 2 working days. The price depends on the version and its options, the number of robots, delivery and commissioning on your site, training, and the acquisition mode: purchase, rental or RaaS with one monthly fee. Prices are not published because these items change from one project to the next.

Is the DF106 supplied with an EU declaration of conformity?

Yes. Robot Distribution supplies the EU declaration of conformity with every robot it delivers in Europe. Ask for a copy with your quote and our team sends it with the other documents.

How are delivery and commissioning organised?

The delivery address, the date and the commissioning on site are set out in the written quote, according to your site and the number of robots. Our team can install the robot, map the site and train your staff.

Can I rent the DF106 or take it as RaaS?

Yes. Rental runs from 1 day to 12 months; RaaS runs from 24 to 60 months with one monthly fee that covers the robot, maintenance, software updates and a replacement robot if one fails. Both are priced in a written quote.

What after-sales service is available?

After-sales service is run from Europe: a service contract, spare parts, repairs and training can be added to a purchase, and maintenance is included in RaaS. The terms are set out in the written quote.

SIMILAR ROBOTS

Compare before you decide.

All robots in Construction robots
  • ZP420D

    ZP420D

    Construction robots

    Key feature
    400–600 sqm/h
    Weight
    365 kg
    Key feature
    2 m screed head
    On order
    Price on request
  • Okibo EG7

    Okibo EG7

    Construction robots

    Work rate
    93 sqm/h
    Weight
    362 kg
    Key feature
    Fits standard doorways (68.5 cm)
    On order
    Price on request
  • Concrete Leveling Robot 25

    Construction robots

    Key feature
    ≥300 sqm/h
    Weight
    350 kg
    Key feature
    2.5 m screed head
    On order
    Price on request

Tell us about your site. We will size the fleet.

A written proposal: robots, acquisition mode and delivery.