Construction robots
- Key feature
- 5,000 lb (2.3 t) of rebar per hour
- Key feature
- Bars from 2.7 to 18.3 m
- Key feature
- 50 % schedule saving with TyBOT
On order
Price on request
01 / 04Aqua Cutter 450V
A construction robot by Aquajet with tower reach 4 m, 10 m supported, 3,000 bar, Infinity oscillation and electric, 55 dB.
On orderConstruction robot
PURCHASEOutright purchase
You own the robot. Warranty, training and a service contract can be added.
Number of robots
Price on request
Purchase price, ex VAT, in the written quote.
- No commitment. A request is not an order.
- EU declaration of conformity supplied with every robot.
IN BRIEF
The Aqua Cutter 450V in brief.
Updated · Source: manufacturer's published specifications
The Aquajet Aqua Cutter 450V Hydrodemolition Robot is a construction robot by Aquajet. Key figures published by the manufacturer: tower reach 4 m, 10 m supported, 3,000 bar, Infinity oscillation and electric, 55 dB. Robot Distribution supplies it in Europe to buy, rent or as RaaS, with its EU declaration of conformity. Price on request.
OVERVIEW
The Aqua Cutter 450V in detail
The Aquajet Aqua Cutter 450V is a compact, electric hydrodemolition robot with an extendable tower reaching 4 m, or 10 m with top support. An adjustable hoist and tilt function position the lance precisely for horizontal, vertical and overhead work in shafts, on high walls and in confined urban sites. It removes concrete with water at up to 3,000 bar using Aquajet's patented Infinity oscillation, under the Evolution 3.0 control system. It weighs 1,375 kg with a detachable 375 kg power module and runs emission-free at 55 dB.
Key points
- Electric hydrodemolition robot with tower
- 4 m reach, up to 10 m with support
- Up to 3,000 bar, Infinity oscillation
- Emission-free, 55 dB
SPECIFICATIONS
Full specifications
Updated · Source: manufacturer's published specifications
| Speed | Roller speed up to 25 m/min and track speed up to 15 m/min in automatic mode |
|---|---|
| Water pressure | Up to 3,000 bar (43,500 psi), with an Aquajet high-pressure pump |
| Dimensions | Length 2.17–2.34 m, minimum width 0.78 m, track width 0.78–1.16 m, minimum height 0.99 m |
|---|---|
| Operating height | 4 m, up to 10 m with top support |
| Net weight | 1,375 kg in total; detachable Power Control Module (PCM) 375 kg |
| Arm | Extendable tower with adjustable hoist and tilt; side reach 960 mm from centre (+402 mm roller beam offset), side shift 420 mm |
|---|---|
| Motor | Electric motor, 3-phase, 5.5 kW; several voltages and frequencies available |
| Control | Evolution 3.0 control system with absolute sensors, radio or cable remote control up to 300 m; automatic optimisation of oscillation, stroke and travel speed; Aquajet Online tracking option |
|---|
| Noise level | 55 dB (robot) |
|---|
| Key feature | Tower reach 4 m, 10 m supported |
|---|---|
| Key feature | 3,000 bar, Infinity oscillation |
| Key feature | Electric, 55 dB |
| Max force | Maximum reaction force 1,600 N |
|---|---|
| Working range | 0–1.7 m, extended 0–3.2 m; lance angle ±45° |
| Functions | Tracked hydrodemolition robot that removes concrete with an ultra-high-pressure water lance, with Aquajet's patented Infinity oscillation (figure-eight lance path at constant surface speed, no pipe holes) |
| Availability | Sold through Aquajet (Brokk group) and its dealers worldwide |
A value the manufacturer does not publish is left out of this page rather than estimated. Conditions stated by the manufacturer are kept with the value.
SOURCES AND LAST CHECK
Where these figures come from.
Every figure on this page comes from the manufacturer's official pages, read and checked by our team.
Figures taken from the manufacturer's published specifications. · Last checked
DOCUMENTS
Documents
Sent with your written quote, in English and in your language where the manufacturer publishes it.
| Document | Availability |
|---|---|
| Datasheet (PDF) | On request |
| EU declaration of conformity | On request |
| User manual | On request |
FAQ
Questions about the Aqua Cutter 450V
How much does the Aqua Cutter 450V cost?
The Aqua Cutter 450V is sold on a written quote, sent within 2 working days. The price depends on the version and its options, the number of robots, delivery and commissioning on your site, training, and the acquisition mode: purchase, rental or RaaS with one monthly fee. Prices are not published because these items change from one project to the next.
Is the Aqua Cutter 450V supplied with an EU declaration of conformity?
Yes. Robot Distribution supplies the EU declaration of conformity with every robot it delivers in Europe. Ask for a copy with your quote and our team sends it with the other documents.
How are delivery and commissioning organised?
The delivery address, the date and the commissioning on site are set out in the written quote, according to your site and the number of robots. Our team can install the robot, map the site and train your staff.
Can I rent the Aqua Cutter 450V or take it as RaaS?
Yes. Rental runs from 1 day to 12 months; RaaS runs from 24 to 60 months with one monthly fee that covers the robot, maintenance, software updates and a replacement robot if one fails. Both are priced in a written quote.
What after-sales service is available?
After-sales service is run from Europe: a service contract, spare parts, repairs and training can be added to a purchase, and maintenance is included in RaaS. The terms are set out in the written quote.
SIMILAR ROBOTS
Compare before you decide.
Construction robots
- Key feature
- 1,200+ ties per hour
- Key feature
- Bridge decks 3 to 35.7 m wide
- Key feature
- No pre-mapping or BIM
On orderPrice on request
Construction robots
- Key feature
- 3,000 bar, Infinity oscillation
- Key feature
- Articulated arm, 3 m reach
- Key feature
- Electric, 55 dB
On orderPrice on request
Tell us about your site. We will size the fleet.
A written proposal: robots, acquisition mode and delivery.